I have a DSi that is in very good condition but for the right shoulder button. It does work but I have to press very hard to get it to register. The “lift up the button and blow into it” does actually improve the function of the button for a bit (I use canned air, not moist mouth) but it doesn’t take long at all to NOT work either. Does anyone have a REAL solution that actually works short of disassembly and replacement of the button?

  • DarthBueller@lemmy.worldOPMEnglish
    1·
    5 months ago

    Thanks. I truly dislike working on the NDS and its progeny, except for the 1st gen 2DS. It is stupidly easy to disturb the ribbon cables even with the most careful hand.

    Which doesn’t do much to explain why I bought a pile of DSi XLs to fix up. Separate issue.

    I figured disassembly and cleaning might help but thought maybe there was an actual viable trick.

    Note that a big risk with contact cleaner is that it easily penetrates into the screen. If you’re using an old school contact cleaner this usually isn’t fatal as it tends to quickly evaporate over a few hours at worst. But if you’re using deoxit or something with oils, you will damage the appearance of the screen.