I’ve recently started digitizing my mother-in-law’s collection of home movies. What I would love is some recommendations or tweaks I can do to improve the quality and remove any combing or minimize static. I am not particularly concerned with audio quality, but I’ll list it below as well.

And so far I’m enjoying the processes. It’s really fun to see old videos and to learn a bit about video formats and encoding. I’m an amateur when it comes to these kinds of things so I’m learning as I go along. Each tape I make the picture clearer and the file size smaller!

Recording

  • Sony Handycam (DCR-TRV27)
  • Various DV 60/90 cassette tapes
  • Seemingly ran in standard recording mode (tapes are 60 minutes)

VCR

* I have ordered a A/V to RCA cable which is the manufacturer’s recommended connection, but unsure about the effects on quality

Software

  • OBS for recording the VCR feed
    • Downscale Filter: Bicubic (Sharpened scaling, 16 samples)
    • Deinterlace - Linear 2x
    • 720x540 @ 29.97 FPS (NTSC) (upscaled from 720x480)
    • “Indistinguishable Quality, Large File Size”
      • .mkv format with H.264 encoder
    • Audio Encoder AAC
    • Audio 48khz steroe
  • Handbrake for re-encoding
    • 720x480 @ 29.97 FPS
    • H.264 (x264) MKV format
    • No additional deinterlacing
    • “Constant Quality” set to 20
    • Audio Encoder AAC
  • jaredEnglish
    3·
    4 months ago

    I’d look into that a bit, it’s Sony so the software may be out there somewhere. But you may run in to driver or windows version problems.

    • NotNotMike@programming.devOP
      2·
      4 months ago

      I’ll check and see if I have a Mini-USB lying around somewhere and plug it in and see what happens. Ideally I’d prefer not to have to install software to record but I suppose if it results in the best video quality that may be the best option

    • NotNotMike@programming.devOP
      1·
      4 months ago

      Update: Found the cable, but connecting to the computer results in an unrecognized device. Sony stopped hosting the drivers in 2019, so I fear I may be out of luck in terms of a USB connection - unless I risk downloading a driver off the internet which I’m not inclined to do…

      • fakeman_pretendname@feddit.uk
        2·
        4 months ago

        Unless there’s something very unique about the camera, the USB is only going to transfer still images off the memory card (and possibly supply a low-res webcam function) - you won’t be able to transfer video through it.

        There should be a mini-firewire/mini-DV/iLink port hidden under a flap - that will connect to a firewire port on a desktop, or an older laptop.

        If you don’t have access to a firewire port, your existing S-Video/AV cable is still your best option.

        Unless anything magical has happened recently, a firewire to USB will not help you for video capture.