Gormadt@lemmy.blahaj.zone to 3DPrinting@lemmy.worldEnglish · 10 months agoBe honest folks, how bad are y'all's resin build plates?files.catbox.moeimagemessage-square22fedilinkarrow-up166arrow-down12file-text
arrow-up164arrow-down1imageBe honest folks, how bad are y'all's resin build plates?files.catbox.moeGormadt@lemmy.blahaj.zone to 3DPrinting@lemmy.worldEnglish · 10 months agomessage-square22fedilinkfile-text
minus-squareanlumo@lemmy.worldlinkfedilinkEnglisharrow-up5arrow-down1·10 months agoI question your definition of flat. I’m always using a plastic spatula, so mine is pristine.
minus-squareGormadt@lemmy.blahaj.zoneOPlinkfedilinkEnglisharrow-up1·10 months agoNo sharp protrusions that could puncture or damage the screen or vat. So I say flat. I was never successful using a plastic spatula so I used a metal one
minus-squareanlumo@lemmy.worldlinkfedilinkEnglisharrow-up2arrow-down1·10 months agoThe trick is to include a wedge in the base of the print, then you don’t need much force. The standard base plate generated by ChiTuBox does have one already.
I question your definition of flat.
I’m always using a plastic spatula, so mine is pristine.
No sharp protrusions that could puncture or damage the screen or vat. So I say flat.
I was never successful using a plastic spatula so I used a metal one
The trick is to include a wedge in the base of the print, then you don’t need much force. The standard base plate generated by ChiTuBox does have one already.