Network design. I started my homelab / selfhost journey about a year ago. Network design was the topic that scared me most. To challenge myself, and to learn about it, I bought myself a decent firewall box with 4 x 2.5G NICs. I installed OPNsense on it, following various guides. I setup my 3 LAN ports as a network bridge to connect my PC, NAS and server. I set the filtering to be applied between these different NICs, as to learn more about the behavior of the different services. If I want to access anything on my server from my PC, there needs to be a rule allowing it. All other trafic is blocked. This setup works great so far an I’m really happy with it.
Here is where I ran into problems. I installed Proxmox on my server and am in the process of migrating all my services from my NAS over there. I thought that all trafic from a VM in Proxmox would go this route: first VM --> OPNsense --> other VM. Then, I could apply the appropriate firewall rules. This however, doesnt seem to be the case. From what I’ve learned, VMs in Proxmox can communicate freely with each other by default. I don’t want this.
From my research, I found different ideas and opposing solutions. This is where I could use some guidance.
- Use VLANs to segregate the VMs from each other. Each VLAN gets a different subnet.
- Use the Proxmox firewall to prevent communication between VMs. I’d rather avoid this, so I don’t have to apply firewall rules twice. I could also install another OPNsense VM and use that, but same thing.
- Give up on filtering traffic between my PC, NAS and server. I trust all those devices, so it wouldn’t be the end of the world. I just wanted the most secure setup I could do with my current knowledge.
Is there any way to just force the VM traffic through my OPNsense firewall? I thought this would be easy, but couldn’t find anything or just very confusing ideas.
I also have a second question. I followed TechnoTim to setup Treafik and use my local DNS and wildcard certificates. Now, I can reach my services using service.local.example.com
, which I think is neat. However, in order to do this, it was suggested to use one docker network called proxy
. Each service would be assigned this network and Traefik uses lables to setup the routes. ’
Would’t this allow all those services to communciate freely? Normally, each container has it’s own network and docker uses iptables to isolate them from each other.
Is this still the way to go? I’m a bit overwhelmed by all those options.
Is my setup overkill? I’d love to hear what you guys think! Thank you so much!
I would probably put my WLAN on a different subnet/VLAN then the rest of the network, maybe even split it into trusted and guest networks if your AP’s support broadcasting multiple SSID’s. I don’t see anything about NAT/PAT so I assume this isn’t going to touch the Internet and just for home brew fuckery.
Both public and local services. I have limited hardware for now, so I’m still using my ISP router as my WLAN AP. Not the best solution, I know, but it works and I can seperate my Home-WLAN from my Guest-WLAN easily.
I want to use an AP at some point in the future, but I’d also need a managed switch as well as the AP itself. Unfortunately, thats not in my budget for now.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters AP WiFi Access Point IP Internet Protocol IoT Internet of Things for device controllers NAS Network-Attached Storage NAT Network Address Translation SSD Solid State Drive mass storage SSH Secure Shell for remote terminal access SSO Single Sign-On VPN Virtual Private Network
9 acronyms in this thread; the most compressed thread commented on today has 10 acronyms.
[Thread #427 for this sub, first seen 13th Jan 2024, 22:05] [FAQ] [Full list] [Contact] [Source code]
It sounds like what you’re looking to achieve is what’s known as zero trust architecture (ZTA). The primary concept is that you never implicitly trust a particular piece of traffic, and always verify it instead.
The most common way I’ve seen this achieved is exactly what you’re talking about - more micro-segmentation of your network.
The design principles are usually centred around what the crown jewels are in your network. For most companies applying ZTA, that’s usually their data, especially customer data.
Ideally you create a segment that holds that data, but no processing/compute/applications. You can also create additional segments for more specific use cases if you like, but I’ve rarely seen this get beyond three primary segments: server; database; data storage (file servers, etc).
In your case, you can either create three separate VLANs on your Proxmox cluster, with your your OPNsense firewall having an interface defined in each, or use the Proxmox firewall. I’d go the former - OPNsense is a lot more capable than the Proxmox firewall, especially if you turn on intrusion detection.
I’m not using any further segmentation beyond my VMs sitting in their own VLAN from my physical, but here’s a screenshot of my networking setup on Proxmox. I wrote this reply to another post here on Selfhosted, talking about how my interfaces are setup. In my case, I have OPNsense running as a VM on the same Proxmox cluster. As I said in there, it’s a bit of a headfuck getting it done, but very easy to manage once setup.
BTW, ZTA isn’t overkill if it’s what YOU want to do.
You’re teaching yourself some very valuable skills and, and you clearly have a natural talent for thinking both vertically and horizontally about your security. This shit is gold when I interview young techs. One of my favourite interview moments is when I ask about their home setups, and then get to see their passion ignite when they talk about it.
Thank you so much for your kind words, very encouraging. I like to do some research along my tinkering, and I like to challenge myself. I don’t even work in the field, but I find it fascinating.
The ZTA is/was basically what I was aiming for. With all those replies, I’m not so sure if it is really needed. I have a NAS with my private files, a nextcloud with the same. The only really critical thing will be my Vaultwarden instance, to which I want to migrate from my current KeePass setup. And this got me thinking, on how to secure things properly.
I mostly found it easy to learn things when it comes to networking, if I disable all trafic and then watch the OPNsense logs. Oh, my PC uses this and this port to print on this interface. Cool, I’ll add that. My server needs access to the SMB port on my NAS, added. I followed this logic through, which in total got me around 25-30 firewall rules making heavy use of aliases and a handfull of floating rules.
My goal is to have the control for my networking on my OPNsense box. There, I can easily log in, watch the live log and figure out, what to allow and what not. And it’s damn satisfying to see things being blocked. No more unknown probes on my nextcloud instance (or much reduced).
The question I still haven’t answered to my satisfaction is, if I build a strict ZTA or fall back to a more relaxed approach like you outlined with your VMs. You seem knowledgable. What would you do, for a basic homelab setup (Nextcloud, Jellyfin, Vaultwarden and such)?
What would you do, for a basic homelab setup (Nextcloud, Jellyfin, Vaultwarden and such)?
I guess my first question is are you intending to open up any of these to be externally available? Once you understand the surface area of a potential attack, you can be a lot more specific about how you protect yourself.
I have just about everything blocked off for external access, and use an always-on Wireguard VPN to access them when I’m not home. That makes my surface area a lot smaller, and easier to protect.
Only Nextcloud if externally available so far, maybe I’ll add Vaultwarden in the future.
I would like to use a VPN, but my family is not tech literate enough for this to work reliably.
I want to protect these public facing services by using an isolated Traefik instance in conjunction with Cloudflare and Crowdsec.
Right, then you’ll probably want to do something similar to what I’m planning next, which is creating a small “DMZ” VLAN, for the public facing things, and being very specific about the ACLs in/out, default deny anything else.
The few things I allow public access to are via Nginx Proxy Manager, using Authelia for SSO/2FA where applicable. I’m intending to move that container into a dedicated VLAN that only allows port 443 in from anywhere (including other VLANs), and only allows specific IP/port combinations out for the services it proxies.
I don’t even intend to allow SSH in/out for that container. I can console in from the Proxmox management console if required.
Sounds like I’ll do just that, thanks. Should I move all public facing services to that DMZ or is it enough to just isolate Traefik?
Just the stuff that’s being accessed directly, so if anything’s only going to be accessed via your Traefik server from outside, leave them where they are. That way, any compromise of your Traefik server doesn’t let them move laterally within the same VLAN (your DMZ) to the real host.
I see, thanks for clearing that up.
Might want to move the NAS to a separate, unrouted VLAN. Storage only needs local connections and it’s good practice not to make it routable.