Raspberry Pi 5 – Raspberry Pi
www.raspberrypi.com
The everything computer. Optimised. Coming October 2023
  • Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches and a 2MB shared L3 cache
  • VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
  • Dual 4Kp60 HDMI® display output with HDR support 4Kp60 HEVC decoder
  • LPDDR4X-4267 SDRAM (4GB and 8GB SKUs available at launch)
  • Dual-band 802.11ac Wi-Fi®
  • Bluetooth 5.0 / Bluetooth Low Energy (BLE)
  • microSD card slot, with support for high-speed SDR104 mode
  • 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
  • 2 × USB 2.0 ports
  • Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT)
  • 2 × 4-lane MIPI camera/display transceivers
  • PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter)
  • 5V/5A DC power via USB-C, with Power Delivery support
  • Raspberry Pi standard 40-pin header
  • Real-time clock (RTC), powered from external battery
  • Power button
  • RobotToasterEnglish
    101·
    1 year ago

    No actual PCIe or M.2 connector on the board, the M.2 hat won’t be available at launch, and it appears to block the required(?) coolers from being fitted.

      • Bonehead@kbin.social
        1·
        1 year ago

        I still have a bad taste in my mouth from the Pine64 I bought from their Kickstarter. The thing lasted 4 months before it stopped booting. I have no faith in any subsequent products.

          • Bonehead@kbin.social
            1·
            1 year ago

            There were reports that many of the original Pine64 Kickstarter boards had this bootloop problem. While I understand this was one of there first products, I still don’t want to sink money into something when better and more stable options are available.

              • Bonehead@kbin.social
                1·
                1 year ago

                If that’s true then they fixed any quality issues on subsequent boards, so you questioning the stability and quality of the current boards is no longer substantiated

                Meanwhile, anyone that supported their Kickstarter got screwed.

                but I’m curious what you would consider a more stable option?

                Why would I bother when you’re obviously just going to pick it apart, just like you did with the Pi immediately after asking that question. You like the Pine64, great. Good luck with that. I won’t touch them with a 10 foot pole. That’s my opinion. Have a nice day.

    • PeachMan@lemmy.worldEnglish
      31·
      1 year ago

      Not required. And it might block the OFFICIAL cooling case, but it’s a Raspberry Pi. There will be a hundred different custom cooling options soon.

      • Treczoks@lemmy.worldEnglish
        7·
        1 year ago

        The problem is that the M.2 thing still is a HAT, and basically sits about 10mm above the main board, leaving no room for proper active or passive cooling - or at least making it very complicated to achieve. Putting the M.2 slot at the bottom of the main board would have been a good solution that would have avoided a lot of problems.