So I wanted to get myself a Kill-a-watt. Being who I am, I wanted information regarding its accuracy, especially at low power draws. I found a comparison with a industry grade equipment (Fluke is about the best out there in handheld electrical meters). It’s not encouraging, so I thought about a more proper meter, but it’s not easy to find an actual power meter that is accurate at low loads, isn’t a hassle to install and doesn’t cost an arm and a leg.
What do you use? Am I overthinking it?
Edit: thanks everyone for chiming in! To clarify a few things:
- I wasn’t (at least initially) looking for a permanent installation on my home server, but rather a good instrument to measure things around the house once I’m done fiddling with the server.
- the comparison with Fluke was just to illustrate what kind of error we can expect from a Kill-a-watt. It would be nice to have a Fluke power meter, but there’s nothing I do at home would even come close to justify it. The kill-a-watt is such an old design and the company behind it seems to focus on cheap trinkets. I was just hoping to find something a bit better than what P3 offers. Wouldn’t mind paying up to $75 for the same features and better accuracy.
- I looked for a multimeter that measured power somehow as I need a better one that can measure capacitance too anyway. Didn’t find it.
I personally make use of the sonoff pow smart plugs, with Tasmota firmware. Though any Tasmota compatible smart plug with power readings will work.
The key thing is that with Tasmota, you can properly calibrate the readings. I have a friend with a high quality power meter. I used that to calibrate my smart plugs, they seem to track within a few % of the expensive one, once calibrated.
Depending on if you have access to an expensive meter or not, this will either be the best bet, or completely useless to you. Your local Hackspace might also be a good option for getting your hands on an expensive meter for an evening.
I’ll look into it, sounds promising! Thanks!