i installed manjaro and tbh I don’t think I’m going to touch windows again unless I have to. my only unsolvable issue so far is (I think) my PC is having a hard time detecting Linux when I restart my computer. it just sometimes will tell me to restart and change to a bootable drive through BIOS.

I have the 55Wh battery. When I’m not using the Power Saver profile, I’d say it lasts for 5-6 hours. Using the Power Saver profile, I get around 6-7h. Keep in mind I have the base Ryzen 5 model and 16GB of RAM, so power utilization may vary depending on your configuration

I haven’t tried that exact set up myself but in hyprland the default tiling would have your Elden Ring on one half and your friends the other half. Then if you opened up discord it would split one of the halves in half again. If you wanted to have discord instead floating and over top of the stream you could do that, or send it to the next “desktop” over if you don’t need to see it. You can customize each of the tiles however you like, border or no border, you can move them around…

I just started tinkering with this yesterday in Gnome on Pop! and it looked like there are options to exclude certain programs from tiling if that’s what you’re looking for.

In i3wm you can set a key bind to float a window above the tiling and it’ll do just that; You can even automate it with some custom for_window rules if desired.

Its hit and miss, likely you have to set up window rules to get a good experiemce.

I get that maybe it’s preconfigured which might make sense on dell pc’s that’d fit a few drives in empty sata slots, but it took me nearly two days to think of that solution.

I figured throw it out there in case someone else has issues with an install locating the main drive on a Dell.

No, that’s a coincidence. I wanted something that: started loud, was easy to recognise, I don’t mind hearing, and my neighbours don’t listen to. Wicked World it is.

Here’s the code by the way, with the echo translated:

lvxInternetCheck () {
	while [[ $(ping -c 5 8.8.8.8 | grep -o "100% packet loss") == "100% packet loss" ]]
		do echo "No internet at $(date +%R)." ; sleep 300
		done
	echo "Internet came back at $(date +%R)."
	cvlc /[redacted]/08\ -\ Wicked\ World.mp3 
	}

It’s dirty but it works. (My functions start with “lvx” to avoid the tiny chance that they might clash with system functions.)

Weird. I’ve used 1000,2000,3000,4000 series without any issues ever.

Just bash

Yeah i had avoided it cos it wasn’t behaving with vscodium in flatpak but finally got around to reinstalling code on the machine directly.

Generally I use my computer to launch programs that do the stuff I want to do, or edit my files.
My files are in /home and programs for the tasks I need are available as flatpaks.
So I don’t need to rummage around in the rest of the file system. You could call it “a laptop for grandma” except I’m not that old. I use my laptop for office stuff, gaming, photo editing, streaming music and video, browsing, mail, messaging, ssh’ing into my servers, etc. What I don’t use it for anymore is tinkering with my OS. I’m fine with default Gnome and I don’t need to adjust every little thing, I can just adjust myself a bit to how the GUI works.
I just don’t want to read Arch news before I update weekly, set apt-pinning priorities to disable snap, deal with recommended dependencies, meta packages, mirrorlists, third-party repo urls, gpg keyfiles, file permissions, executable flags, systemd services, and all that jazz anymore.

I have an external DAC, so I don’t need to think about how good music the PC/Raspberry/… produces.

KVM/QEMU via virt-manager. I would imagine that your use case would work if you pass the USB device or the entire usb host controller through to the VM, but I’m not sure. Please check the video linked in my other comment for more information on the single GPU setup

I dunno what you were using but I recommend virt-viewer.

The main thing for this one is that you’ll want to get a PCIe USB controller card and pass that through directly to the VM so that unplugs/replugs/device resets don’t connect the device to the host machine briefly while if determines if it should pass through.

Hey there, just using a single GPU in this system. If you have multiple adapters, you can try something like LookingGlass instead. In my case, I would need a single GPU that supports SRIOV, which is typically relegated to data centre products (I believe someone actually managed this with an Intel iGPU + and experimental sriov driver!).

I’m just passing my GPU through to a virtual machine; it takes precedence over the graphical session, leverages all connected displays and relevant peripherals, and gracefully resumes back into GDM / GNOME once the VM is powered off (can do this conventionally within W10).

I mostly followed this video:

https://www.youtube.com/watch?v=eTWf5D092VY

key thing for AMD gfx is to set ROMBAR = 0 in virt config, this will allow you to actually get functioning display output once the VM is started up.

As for your buying choices, consumer AMD GPUs have issues with GPU reset (unlike Intel or Nvidia). I think your experience with nvidia graphics here will be better than mine here with amd.

Byt yeah, since you have multiple gfx adapters at your disposal, it should be possible to get started with LookingGlass (a VM in a movable, resizable window that is fully hw accelerated with shared memory). The Level1Techs forum for LG is very helpful, though I believe the creator of the video above also has a relevant guide for this.