Yo everyone. I’m trying to understand how USB power works with batteries, hopefully this is the correct community to ask. We have so many different devices that can be charged with USB-C, yet all the power bricks and power banks have different voltage, amps, watts. Can I use any USB-C brick or power bank with any device and battery and it must intelligently never draw over the limits of the power source?

I thought that USB-C is made for this yet I can read reports that people damaged their Nintendo Switch because of a power brick. How careful do we have to be when charging our phones, tablets, laptops, gaming devices? What exactly to look out for when deciding what to plug in where? Thank you very much for any replies.

  • edent@lemmy.one
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Yes, it is not possible for a USB-C charger to deliver too much power to a device. You should be able to use any USB-C device with any charger - with three caveats.

    Firstly, not all USB-C chargers will go up to the maximum limit of your device. If you have a 5v 2A charger supplying 10Watts - that’s going to take a long time to fill your device.

    Secondly, not all USB-C devices support all possible charging profiles. So you may have a charger which can give one device 65W but not another.

    Thirdly, the cable matters. A cheap £1 cable isn’t going to be able to to charge at maximum power. Get a cable which is specified for the job.

    Here’s my review of a USB-C charger which experienced these problems - https://shkspr.mobi/blog/2020/06/review-ylpower-87w-usb-c-charger-msh-87pd/

    • octoffset@sh.itjust.worksOP
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      Thank you very much. I have a follow up question. Is it OK to charge a device which has an original charger of 65W with say a 10 or 22W charger? Is it just the charging speed that’s affected or are here overheating concerns as well?

      • edent@lemmy.one
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        If a device needs 65W and you give it 22W one of two things will happen

        1. It will charge very slowly
        2. It will not charge at all

        There is no risks of overheating.

        • octoffset@sh.itjust.worksOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          That’s very cool. I checked my laptop and it has USB-C Power Delivery, does that mean I can try to charge it with my Switch charger? That one gets 39W on its 15V output which my laptop has to support as well, being PD compliant?