cross-posted from: https://lemmy.dbzer0.com/post/12359577
There are a few youtube videos where someone suggests using sulfuric acid to clean a secondary plate-style heat exchanger (for example). Yet I’ve heard sulfuric acid is extremely corrosive to metal, so something seems off about that advice. I certainly would not want an internal leak to cause radiator fluid to enter the tap water. I saw a drop of sulfuric acid land on a galvanized steel pipe once and within minutes it was rusted on the spot.
This guy also says sulfuric acid is an option but also says there is a safer alternative acid – yet he did not mention what it is! Does anyone know?
This guy says he uses an ultrasonic bath but he does not say what chemicals he uses. Would distilled white vinegar be good for this?
Note these questions are very loosely related to this thread which describes a problem I am having, but really it’s a separate discussion. Secondary exchangers need periodic maintenance regardless of whether this is my current problem. I saved my previously clogged heat exchanger from a few years ago so I could work on cleaning it. I have a quite small ultrasonic I could try, but I cannot submerge the whole exchanger. I would have to stand it on end and only clean a few centimeters deep.
Sulfuric acid can be corrosive to metals, though it depends on the type of metal, the concentration of the acid, temperature, and how long they are in contact with each other.
Any idea what the heat exchanger is made of? You might want to do a spot check in an inconspicuous/inconsequential spot before soaking the whole thing.
What needs to be cleaned off? I assume some kind of hard water deposits. Is it mostly calcium carbonate, calcium sulfate, or a mix of both?
I might guess the exterior is stainless steel but I’m not a chemist. Magnets do not stick to it.
The previous one (removed in 2019) is clearly ram-packed with the kind of yellowish-white limescale flakes which resemble what builds up inside water kettles.
I typically clean water kettles using white distilled vinegar to lift the flakes and pour them out. But I suspect that might not do well in the heat exchanger because the flakes seem to be packed in there. To clean a hot water dispenser (which is for tea but very similar to a coffee maker), I use a proprietary descaling solution which seems to actually dissolve the scaling. No flakes are expelled in that process. So I am tempted to use that stuff, but I don’t really know if the coffee machine cleaner reacts with stainless steel or if stainless steel is what i am dealing with.
I’m guessing the currently installed heat exchanger might be clogged with something different. I think after just a few years the tap water side of it would not be clogged yet. But in the summer I flushed a few radiators and ran radiator cleaner through the system. Drained that out, refilled, then added “inhibitor” which prevents corrosion in the radiators. I lost hot tap water service after increasing the pressure in the radiator circuit. So I wonder if the cleaning solution caused debris to circulate and get trapped in the exchanger. There might be a mixed bag of sludge clogging the current heat exchanger.