Unfortunately EVs aren’t in a place where they can be used by everyone. I owned a Model 3 LR and never got anywhere near the range it claimed. It was constantly recalculating my next stop to charge.

On long drives the range is a real problem. A 9 hour drive turned into 12 because I had to stop every 2 hours to charge for 20 minutes. I actually had to turn around go backwards an hour because it decided I couldn’t make it to the next charger. This wasn’t during extreme cold or heat… it was beautiful outside I was doing the speed limit without the AC on.

The range issues plus the dozens of phantom braking incidents on that trip caused me to trade it in for an ICE car as soon as I got back home. EVs are great for around town daily driving, but if you ever take long trips they are not ready yet. I want to own an EV and will certainly have one as my next car, but today is not that day.

This. I’m currently hosting Invidious and accessing it with Yattee on my iOS devices. It’s been amazing how clean of an experience I’ve had.

The Two Generals Problem

I have a spare Pi4 sitting around the house that I could pretty cheaply turn into a PiKVM. Looks like there are some slick hats to install into a PCI-E slot so I don’t have a Pi and a bunch of wires hanging out in the chassis. Looks like I’ll be going that route. Just need to figure out how to power it (they all seem to require external 5v or POE).

Does the IPMI or KVM go on a private network of some sort? Surely you wouldn’t want to expose that to the internet.

This is good info! I’ll follow up with the provider. Unfortunately even though I live in a large city, of the two dozen or so places I contacted only two of them would consider less than a half rack.

consider server motherboards with KVM over IP capabilities

I had not considered this. My plan was to initially just swap the consumer grade stuff I have over to the 826 since it supports ATX, but now I’ll reconsider. Remote KVM has come in handy a few times with my dedicated servers over the years, so lacking that would suck pretty bad. I don’t know that I won’t have access, but several of the other providers stated on their websites that shared cabinets won’t have physical access (which I honestly would prefer since I’ll have several thousand dollars in hardware sitting in there).

Data centers are businesses and as a costumer they should be answering your questions about their operating policies. If they aren’t consider a different DC.

Great point and I totally agree! Just didn’t want to walk in like a complete noob asking a bunch of dumb questions if I could prevent it.

You’re no longer behind a home router with a firewall that has sensible rules, so it is now up to you to avoid getting pwned and footing the power bill. It is also up to you to avoid spamming out stray traffic.

Thankfully I’ve got quite a bit of experience hardening servers exposed directly to the internet. *knocks on wood* So far I’ve managed to not get pwned by turning on automatic security updates, keeping open ports limited to ssh with password/root login disabled and reverse proxying everything. If I need access to something that doesn’t need to be exposed I just port forward through ssh.

You’ll also need a security device like a firewall or router

This is one of the major reasons I’m moving to Proxmox. I’m going to virtualize OPNsense or pfSense and put everything behind that. I guess I should have said that I’ve host multiple dedicated servers over the decades, so from a security standpoint I’m pretty familiar. Really just trying to focus on the hardware side since this is the first time I will actually be responsible for managing and maintaining the hardware.

Currently have about a dozen friends and family I’m sharing with and see concurrent stream counts upwards of 8 during peak. My seed/plex box for public currently hosts them, but it uses gdrive for the storage.

I have a 100tb array at home, but internet in my area is limited to 20mbit up, so I can’t host that many steams. I looked into colocating it, but holy crap prices have gone up over the years for 2u. Only 3 of the dozen places I asked for quotes would even consider less than a half rack.

I’ve actually created a Lemmy instance (Lemmy.link) to bridge the gap between RSS feeds and Lemmy. We have 36 communities (topics) you can subscribe to from your home instance. Each community has the RSS sources listed in the “Feeds” section of the community sidebar. I’m always open to feedback on new community ideas or how to make it better. Currently I’m working on having the bot parse the article and ignore if it is an ad or sponsored and also including the channel name in the subject line for YouTube sources. Eventually I’d also like to train a model on which topics don’t receive upvotes or comments and attempt to ignore them for a better signal:noise ratio.

You’re mostly spot on, but point updates are usually patches for security and bugs. You SHOULD take all point updates.

IMO ansible is over kill for my homelab. All of my docker containers live on two servers. One remote and one at home. Both are built with docker compose and are backed up along with their data weekly to both servers and third party cloud backup. In the event one of them fails I have two copies of the data and could have everything back up and running in under 30 minutes.

I also don’t like that Ansible is owned by RedHat. They’ve shown recently they have zero care for their users.

This is so misleading. He was supposed to receive $30M for sponsoring FTX and was paid in stock. That stock is now worthless. He didn’t lose any of his own money - he just didn’t get paid to promote a fraudulent company.

Old dogs can learn new tricks. Picking up programming has never been easier. Everyone wants to act like ChatGPT is going to replace programmers, but in reality it is a great tool to walk you through projects and explain the how and why.

and removed the domain from my web search results on my SearxNG server

How did you do this? Didn’t realize that was possible.> pp, blackholed the domain in my Pi-hole servers, and removed the domain from my web search results on my SearxNG serve

Found it: https://github.com/searxng/searxng/issues/1258#issuecomment-1146883879

The bot doesn’t have a way to tell between what is “gaming” and what is not. If the website posts it on their gaming rss feed it posts it. I’ve removed polygon since it has had several issues like this and added Kotaku.

I flipped it to Kotaku

It’s directly from Polygon unfortunately. I think it’s time to replace Polygon with something a bit more quality.

Ultimately it will be as noisy as the RSS feeds the community is configured for. Most of the noise in local right now is from me adding new communities and new feeds as the bot is backfilling links already in the RSS feeds.

The bot currently checks the RSS feeds every 5 minutes (to capture breaking news quickly), but it only posts new links that it hasn’t seen before. As we start to scale out I may change that to use some actual logic configurable per feed with rate limiting just in case we start to run into performance issues.

This has been the biggest struggle for me so far: finding RSS feeds that stay on topic. I tried making a couple communities for sports teams I follow and they all had articles from other teams and sometimes even other sports in them.

lol. ya that linkbot guy just doesn’t stop posting.