The electric car manufacturer Tesla had to issue a massive recall this month to fix faulty hood latches that can open while its cars are driving. The problem affects more than 1.8 million cars, which means it’s slightly smaller than the recall in December that applied to more than 2 million Teslas.

The problem, according to the official National Highway Traffic Safety Administration’s Part 573 safety recall report, affects model year 2021–2024 Model 3s (built between September 21, 2020, and June 2, 2024), model year 2021–2024 Model Ss (built between January 26, 2021, and July 15, 2024), model year 2021–2024 Model Xs (built between August 18, 2021, and July 15, 2024), and model year 2020–2024 Model Ys (built between January 9, 2020, and July 15, 2024).

The problem first became apparent to Tesla in March of this year after complaints about unintended hood opening from Chinese customers. By April, it had identified the problem as deformation of the hood latch switch, “which could prevent the customer from being notified about an open hood state.”

Although the problem is with the hood latch, as with many Tesla safety recalls, the problem can be fixed with an over-the-air software patch. The new software is able to detect if the hood is open and, if so, will display a warning to the driver to alert them to stop their vehicle and secure the hood.

  • TheFeatureCreature@lemmy.world
    link
    fedilink
    English
    arrow-up
    283
    arrow-down
    13
    ·
    edit-2
    4 months ago

    The new software is able to detect if the hood is open and, if so, will display a warning to the driver to alert them to stop their vehicle and secure the hood

    This should not be legal. They should be forced to recall vehicles and replace the faulty part instead of kindly asking drivers to pull over when the part fails.

    The shit this company gets away with is astounding.

    • TriPolarBearz@lemmy.world
      link
      fedilink
      English
      arrow-up
      161
      arrow-down
      5
      ·
      4 months ago

      Driving on the highway

      Hood pops open. Can’t see anything. Try to brake but crash.

      ⚠️ Warning! Your hood is open. Please pull over in a safe location and secure your hood.

      Tesla: OTA update successful

      • ironhydroxide@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        76
        arrow-down
        4
        ·
        4 months ago

        Yup. No reason to rewrite the playbook.

        “Full self driving” detects an imminent collision of it’s own doing. Car beeps and shuts off “full self driving”

        Human was “in control” at the time of the crash, not our fault.

        • Tja@programming.dev
          link
          fedilink
          English
          arrow-up
          7
          arrow-down
          2
          ·
          4 months ago

          Human was supposed to be in control the whole time. In a Tesla and in basically any car, very limited exceptions apply. If some asshole goes to sleep at the wheel that’s the asshole’s fault.

          • nilloc@discuss.tchncs.de
            link
            fedilink
            English
            arrow-up
            9
            ·
            edit-2
            4 months ago

            Yeah but turning off assists the split second before a crash is a bullshit way to try and claim it wasn’t involved in the crash. Tesla was caught doing that a couple years back.

          • Maggoty@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            arrow-down
            2
            ·
            4 months ago

            This is an unrealistic standard. We are not robots. We didn’t come with a standby mode unless we’ve actually worked on silently watching a vista while being ready to act at a moment’s notice. And honestly, even the people we pay to do that have problems with inattentiveness and falling asleep.

            We need to jump from actually controlling the vehicle to a self driving system good enough to take a nap in. The middle part is extremely dangerous to humans.

            • NeoNachtwaechter@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              arrow-down
              1
              ·
              4 months ago

              This is an unrealistic standard. We are not robots. We didn’t come with a standby mode

              True. That’s why driving with assist sytems does not make driving more safe.

              We need to jump from actually controlling the vehicle to a self driving system

              Get a Mercedes. They guarantee you some (limited, but still) hands-free time in the driver seat.

            • Tja@programming.dev
              link
              fedilink
              English
              arrow-up
              2
              arrow-down
              1
              ·
              4 months ago

              I disagree, even the middle part is safer than before. It’s a net positive and will continue to improve.

              • Maggoty@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                arrow-down
                1
                ·
                4 months ago

                It’s safer as a backup system yes. As a nudge in the wheel near the lines, as a light brake before the AEB has to kick in. Tesla’s is not safe. It makes people look elsewhere for engagement when the car is not ready to take full control.

      • goferking0@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        11
        arrow-down
        2
        ·
        4 months ago

        Just like the rumored cut all driver aids instant before crash to say it wasn’t due to any of the auto pilot features

      • Lev_Astov@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        4 months ago

        The only way the hood can pop open on the highway is if it was open before you departed, so the warning would alert the user just like the switch did before they can drive to a dangerous speed.

    • Meldrik@lemmy.wtf
      link
      fedilink
      English
      arrow-up
      69
      arrow-down
      7
      ·
      4 months ago

      It’s not the actual latch that’s faulty, but the warning the driver should get, if they haven’t closed the frunk properly.

        • Liz@midwest.social
          link
          fedilink
          English
          arrow-up
          8
          arrow-down
          2
          ·
          4 months ago

          It’s pretty tough to say without looking at comparable recall rates for other companies. My Toyota Corolla had two recalls that I know about while I owned it, and Toyota is known for their reliability. Tesla is just always in the news because they’re always in the news.

          • fuckwit_mcbumcrumble@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            8
            ·
            4 months ago

            Toyota is also known for their reluctance to issue recalls even though they REALLY need to do a recall because they don’t want to tarnish their reputation for reliability. Often waiting until the government forces them to issue the recall. I’d much rather the Ford approach and just issue recalls like candy on Halloween. Sure having 700 recalls sucks, but driving a defective car sucks even more.

        • Lev_Astov@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          ·
          4 months ago

          Microswitch lever fatigue is what this sounds like and it’s really not the kind of thing that a QA team could ever detect without years of testing. This is just how it’ll go as we add more bells and whistles to all our cars. More obscure new issues will be identified years down the line and added to institutional knowledge for future use.

        • lone_faerie@lemmy.blahaj.zone
          link
          fedilink
          English
          arrow-up
          4
          ·
          4 months ago

          To be fair, it’s not an issue with just Tesla, but basically all modern software. The end user has become the beta tester.

        • OutsizedWalrus@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          1
          ·
          4 months ago

          Recalls aren’t uncommon. You just don’t hear about most because it’s not trendy.

          One of my vehicles is at risk of catching fire. The other is at risk of its axle falling off.

          These are major brands, within the past 5 years.

      • FiveMacs@lemmy.ca
        link
        fedilink
        English
        arrow-up
        29
        arrow-down
        1
        ·
        4 months ago

        The latch is fault, and so is the sensor. Sensor doesn’t go off when the latch starts to fail from deformation.

        • Lev_Astov@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          4 months ago

          According to the description, it’s just the sensor, not the latch. The microswitch has a lever like many do and that lever can become bent if damaged which would prevent it from warning the user if they failed to latch the hood. Most older cars just had a secondary latch so if you failed to latch it completely, at least the secondary one would catch it…

          • FiveMacs@lemmy.ca
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            1
            ·
            edit-2
            4 months ago

            Although the problem is with the hood latch, as with many Tesla safety recalls, the problem can be fixed with an over-the-air software patch.

            Not sure what description you’re talking about, but I’m basing this on the article itself.

            Even in your reply…you say the problem is the actual latch being physically damaged.

    • Björn Tantau@swg-empire.de
      link
      fedilink
      English
      arrow-up
      26
      arrow-down
      1
      ·
      4 months ago

      This right here is why there should be a distinction between software updates and physical recalls. Calling this a recall without actually taking the product in and fixing the product is really deceptive.

    • proudblond@lemmy.world
      link
      fedilink
      English
      arrow-up
      24
      arrow-down
      3
      ·
      4 months ago

      That’s not what they’re saying. It’s essentially a “door ajar” warning. The sensor is what’s failing, rather than the physical part.

          • NegativeInf@lemmy.world
            link
            fedilink
            English
            arrow-up
            14
            arrow-down
            2
            ·
            4 months ago

            But it’s not. If you read the article it literally states it’s due to not closing because of deformation of the hood latch switch. Which is a physical object. Sure, you can get a notification now that the thing is open, but guess what, if it flops open while driving, I’ll probably already know that.

            • JohnEdwa@sopuli.xyz
              link
              fedilink
              English
              arrow-up
              8
              arrow-down
              1
              ·
              edit-2
              4 months ago

              And if you’d read it, you’d notice they specifically say it’s the hood latch switch, and not the latch itself, that is deformed. It doesn’t pop open on its own, it falsely detects that the hood is properly closed when it actually isn’t, so it doesn’t warn the driver to go close it before driving off.
              There’s no need to do a physical recall if Tesla can bodge some other way to detect the hood is still open and tell the driver to close it.

    • Maggoty@lemmy.world
      link
      fedilink
      English
      arrow-up
      8
      ·
      4 months ago

      Oh so here’s a fun thing. All American corporations have this level of freedom. We’re just paying extra attention to Tesla because their CEO can’t keep himself out of politics and the news. Ever notice you only see the CEO of GM/Stellantis/Ford when it’s a crisis or a new CEO? That’s how it works in a functional business. They aren’t any less shady, they’re just better at brand and scandal management.

    • meco03211@lemmy.world
      link
      fedilink
      English
      arrow-up
      8
      arrow-down
      3
      ·
      4 months ago

      Ford did this. On multiple years of some vehicles the fuel injector can crack and leak fuel onto the engine and lead to a fire. Their fix is to put in a fucking drain tube to drain the fuel away if that happens rather than replace the faulty part. I’m wondering if there are any legal options to make them just replace the part rather than their half-ass non-fix.

      • ironhydroxide@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        14
        arrow-down
        1
        ·
        4 months ago

        Not even.

        Ford’s fix required them to physically add parts.

        This is more like if Ford just wrote a software update to detect the crack and leak, then pop up a warning that you need to pull over and “secure” the fuel.

    • Gsus4
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      2
      ·
      edit-2
      4 months ago

      Using software to patch design flaws seems to be a recurring cost-cutting pattern these days. Look at the MCAS of the Boeing 737 Max. This is how civilizations go to shit.

      • takeda@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        1
        ·
        4 months ago

        I would say more annoying is to getting those alerts more and more frequently. According to the article this is a software “fix” for the lock banding and stopping functioning.

      • SoJB@lemmy.ml
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        3
        ·
        4 months ago

        It literally states the program is due to a deformation of the switch, a physical issue.

        I’m sure there are ways to safely engineer around it. I don’t trust any American manufacturer to do so. What guarantee do we have that it won’t continue deforming further after the fix? What happens to the patched sensor software if it does occur?

        Do you unironically trust Musk enough to not open your vehicles hood at 80mph?

        Really not sure why so many people on this post are having trouble understanding that concept. Maybe they want to justify their $80k paperweight lmao.

          • OutsizedWalrus@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            4 months ago

            Sometimes you can.

            It’s common to use a Hall effect sensor for positioning. It gives off an analog value. You might be able adjust the signal threshold that you consider to be “open” or “closed” in software.

            Further, this is probably something that you just don’t spend a bunch of time engineering. Pick a value that’s well with your tolerance range and move onto harder problems. When a problem comes up, you can fine turn the range.